With a Hyd-Mech band saw and 2 Milwaukee chop saws MetalForce has the capability to saw cut almost all materials in various shapes, and sizes. From pipe to angle and re bar to C-channel tubing MetalForce has cut it.

From large to small, MetalForce has the capabilities to fabricate custom projects of all sizes. Whether you need an insert to dress up your old fireplace, a large stainless steel hopper or even a metal frame or a trailer, Metalforce has the skill, creativity and ability to meet all these needs.

Stamping is a process by which sheet metal strips are punched using a press tool which is loaded on a machine press or stamping press to form the sheet into a desired shape. Using this procedure MetalForce has been able to produce many high quality parts while meeting, and exceeding their customers requirements and expectations.

MetalForce uses Computer Numeric Controlled press brakes to form multiple different materials at varying lengths with precision accuracy. This capability has allowed Metal Force to form complex components of all sizes to exacting measurements. Combining this ability with their other services has allowed Metal Force to fabricate assemblies and components exceeding industry standards.

With a 159.6″ shear bed width and the capability to shear up to 1/4″ thick material. MetalForce uses their Amada M-4065 shear to cut all types of metals with precision accuracy.

Metal Force owns an Amada Pega 244 punch which they use to produce high quality, high volume sheet metal and aluminum parts. This CNC machine allows MetalForce to consistently punch multiple different sized holes and shapes with high speed precision. Utilizing the turret design to its full extent allows minimal tool changes while producing at optimal production rates. With the capability to punch up to 3/16″ material, this equipment is a valuable asset in high production runs.

Mr. Tony Thurber & the Metalforce Team

I would like to take a moment to say thanks for all of your help on the E.D.O.

Staves Project. The customer has been in and inspected the last of the Staves and

approved them for shipment. This job started out tough and proved to be a trial

throughout the whole project.

The joint effort of Petersen Inc., and Metalforce proved to be outstanding in the

field of fabrication, and a large Thanks goes out to all that were involved.

I personally want to say Thanks again for you sticking with this project and for

your help keeping the project cost as low as possible.

Steve Wardleigh,

Purchasing

Petersen Inc.

Custom Manufacturing, Logistics & Services

www.peterseninc.com

Flying J Headquarters wanted a nice little patio that overlooked their waterfall as a memorial to the founder, Jay Call. MetalForce built a custom gate and handrail along with supplying all the steel required for the overlook construction. Metal Force also supplied all the framework for a beautiful flower box to accent this amazing overlook.

MetalForce, located in Northern Utah, uses an ESAB 360 amp plasma cutting table to cut thick metal plate at high speeds while holding customer specific tolerances. With cutting capabilities that exceed material thicknesses of 2″ thick plate this machinery allows Metal Force to produce high quality structural grade parts. Utilizing this equipment even further, MetalForce has also been cutting out armor plating for use in armored vehicles.

MetalForce, an industry leader in custom metal fabrication, utilizes a precision laser cutting table to cut and etch metal parts. From the smallest part with tight tolerances to large custom signs and much more.